Quality evaluation of jam produced from edible portions of watermelon (Citrullus lonatus)
DOI:
https://doi.org/10.55284/ajc.v11i1.2016Keywords:
Blend, Jam, Pulp, Rind, Watermelon.Abstract
This study evaluated the physicochemical, microbiological and sensory properties of jam produced from the edible portions of watermelon grown in Benue State, Nigeria, as a means of reducing post-harvest losses. Three jam formulations were prepared: Sample A (100% pulp, control), Sample B (100% rind) and Sample C (50% pulp and 50% rind). The jams were analysed for ash, moisture, titratable acidity (TTA), total soluble solids (TSS), pH, total viable count (TVC) and yeast and mould count (YMC) during three weeks of ambient storage, and sensory attributes. Sample C had the highest ash content (1.26%), Sample A the highest moisture (32.40%) and TTA (0.80%), and Sample B the highest TSS (73.44 °Brix); pH (4.20–4.24) did not differ significantly. Microbial growth appeared only in the third week, when TVC and YMC ranged from 2.06 × 10² to 4.45 × 10³ and 2.8 × 10² to 3.4 × 10³ CFU/g, respectively, with Sample B lowest. Sample A had the highest overall acceptability (8.27). Pulp-only jam had the best sensory quality, while rind-containing jams remained acceptable and had higher mineral content. Watermelon rind, usually discarded, can be used in jam production to reduce post-harvest waste.

